Wood repair system

Timbabuild EHB

  • Product Description

Timbabuild Epoxy High Build (EHB) is a two-part thixotropic 3:1 ratio mix solvent free, epoxy based woodfiller. It is specially designed for large and extensive repairs of damaged and rot affected timber in both horizontal and vertical applications. E.H.B. displays high strength and impact resistance.
E.H.B. is supplied in a specially designed side-by-side cartidge that fits into a custom made gun accurately dispensing the filler. Once cured, Epoxy High Build can be machined, drilled and accepts nails, screws etc. E.H.B. can be coated with most decorative wood finishes.
The special ?non-slump? formula allows it to seamlessly replace large sections of wood in aplpications such as windows, doors, beams, gutters, soffits and fascias.

  • Key Features
  • Solvent Free - suitable for indoors and outdoors
  • Thixotropic - Ideal for Vertical & Horizontal applications
  • Cartridge System Ensures Accurate Mixing
  • High Strength & Durability
  • Fast and Simple to Use, Easy to Clean and Store
  • Can be used with the EWS primer system
  • Available Sizes
  • 385ml 3:1 Nylon Cartridge
  • + Specialist Application Tool
More information...
  • Typical Hardening Time
BASE MATERIAL TEMPERATURE (°C) 25 15 5
TYPICAL GEL TIME (mins) 37 85 1202
TYPICAL CURE TIME (hours) 16 hours 30 hours 54 hours
  • Typical Performance Data
  Drillable Sandable Outdoors Indoors Weathered Knotted Stainable Mix Ratio Solids Content Volume Density Application Temp.
EHB ? ? ? ? ? ? ? 3:1 100% 385cm? E.W.S 5 - 30?
  • Typical Physical Property
  - - TEST METHOD STORAGE / SHELF LIFE IMPORTANT
COMPRESSIVE STRENGTH N/mm? 35.00 - (ASTM 695) This product should be stored between +5°C & +25°C.
The Shelf life of the product is 12 months from the manufacture date.
The information and data given is based on our own experience, research and testing and is believed to be reliable and accurate. However, as BIT Products cannot know the varied uses to which its products may be applied, or the methods of application used, no warranty as to the fitness or suitability of its products is given or implied. It is the users responsibility to determine suitability of use. For further information please contact our Technical Department.
APPEARANCE CREAM - -
E MODULUS N/mm? 1129 - (ASTM 790)
TENSILE STRENGTH N/mm? 19 - (ASTM 638)
MIXED DENSITY g/cm? 1.10 - -

Timbabuild ERC

  • Product Description

Timbabuild Epoxy Rapid Cure (ERC) is a two-part 1:1 ratio mix solvent free, rapid curing, epoxy based woodfiller. It is specially designed for small repairs to timber which are subject to stress and impact. Its excellent structural strength and adhesion also enables it to be used as an adhesive. E.R.C. is supplied in a specially designed side-by-side cartidge that fits into a custom made gun accurately dispensing the filler. A unique nozzle attached to the end of the cartridge may be used to blend the base and activator components fully to ensure an accurate mixing. Once cured, Epoxy Rapid Cure can be machined, drilled and accepts nails, screws etc. E.R.C. can be coated with most decorative wood finishes.

  • Key Features
  • Solvent Free - suitable for indoors and outdoors
  • Rapid Curing
  • Cartridge System Ensures Accurate Mixing
  • High Strength & Durability
  • Fast and Simple to Use, Easy to Clean and Store
  • Excellent Adhesion Properties to Many Surfaces
  • Available Sizes
  • 400ml 1:1 Nylon Cartridge
  • Option for Mixer attachment
More information...
  • Typical Hardening Time
BASE MATERIAL TEMPERATURE (°C) 25 15 5
TYPICAL GEL TIME (mins) 4 9 12
TYPICAL CURE TIME (hours) 45 60 90
  • Typical Performance Data
  Drillable Sandable Outdoors Indoors Weathered Knotted Stainable Mix Ratio Solids Content Volume Density Application Temp.
ERC ? ? ? ? ? ? ? 1:1 100% 400cm? E.W.S 0 - 25?
  • Typical Physical Property
  - - TEST METHOD STORAGE / SHELF LIFE IMPORTANT
COMPRESSIVE STRENGTH N/mm? 25.00 - (ASTM 695) This product should be stored between +5°C & +25°C.
The Shelf life of the product is 12 months from the manufacture date.
The information and data given is based on our own experience, research and testing and is believed to be reliable and accurate. However, as BIT Products cannot know the varied uses to which its products may be applied, or the methods of application used, no warranty as to the fitness or suitability of its products is given or implied. It is the users responsibility to determine suitability of use. For further information please contact our Technical Department.
APPEARANCE CREAM - -
E MODULUS N/mm? 970 - (ASTM 790)
TENSILE STRENGTH N/mm? 10 - (ASTM 638)
MIXED DENSITY g/cm? 1.45 - -

Timbabuild EWS

  • Product Description

Timbabuild Epoxy Wood Stabiliser is a specially designed two-part low viscosity, solvent free, resin solution which is designed to strengthen weakened wood fibres by penetrating deep into the wood. The product is used as a primer in conjunction with the Epoxy Rapid Cure (E.R.C.) or Epoxy High Build (E.H.B.) systems. Once the damaged, decayed and discoloured wood has been removed by use of a suitable cutter tool such as a router or chisel, then the area to be treated is lightly sanded to ensure excellent adhesion. The moisture content of the wood should be no greater than 18% (check using a standard moisture meter) and damp wood should be allowed to dry naturally, or by way of a hot air gun. The two components are mixed manually into a separate container, and thoroughly agitated for one minute. The 2:1 mixing ratio should be strictly observed. E.W.S. should be applied using a standard brush and left to cure for 30 minutes.

  • Key Features
  • Solvent Free - suitable for indoors and outdoors
  • Excellent Penetration due to the Low Viscosity
  • Pre-measured to Volume 2:1 ratio to ensure accurate mix
  • High Strength & Durability
  • Fast and Simple to Use, Easy to Clean and Store
  • Can be used with both the E.R.C. & E.H.B. systems
  • Available Sizes
  • 225ml 2 Part Self Mix System
  • Includes Protective Gloves
More information...
  • Typical Hardening Time
BASE MATERIAL TEMPERATURE (°C) 25 20 5
TYPICAL GEL TIME (mins) - 30 -
TYPICAL CURE TIME (hours) - 12 hours -
  • Typical Performance Data
  Drillable Sandable Outdoors Indoors Weathered Knotted Stainable Mix Ratio Solids Content Volume Density Application Temp.
EWS ? ? ? ? ? ? ? 2:1 100% 225cm? 1.08 g/cm? 5 - 30?
  • Typical Physical Property
  - - TEST METHOD STORAGE / SHELF LIFE IMPORTANT
COMPRESSIVE STRENGTH N/mm? N/A - (ASTM 695) This product should be stored between +5°C & +25°C.
The Shelf life of the product is 12 months from the manufacture date.
The information and data given is based on our own experience, research and testing and is believed to be reliable and accurate. However, as BIT Products cannot know the varied uses to which its products may be applied, or the methods of application used, no warranty as to the fitness or suitability of its products is given or implied. It is the users responsibility to determine suitability of use. For further information please contact our Technical Department.
APPEARANCE N/A - -
E MODULUS N/mm? N/A - (ASTM 790)
TENSILE STRENGTH N/mm? N/A - (ASTM 638)
MIXED DENSITY g/cm? N/A - -